Praxair Acetylene, dissolved
Manufacturer Information
Name
Praxair Inc
Address
39 Old Ridgebury
Road
Danbury, CT 06810-5113
Phone
800-645-4633
Effective Date
2015-01-12
Pictogram
   
   
        NFPA
0
4
2

HMIS
                Health | 
              
                 2  | 
            
                Flammability | 
              
                 4  | 
            
                Physical Hazard | 
              
                 2  | 
            
                Personal Protection | 
              
                 
  | 
            
Signal Word
Danger
Hazard Statements
- H220- EXTREMELY FLAMMABLE GAS
 - H231-MAY REACT EXPLOSIVELY EVEN IN THE ABSENCE OF AIR AT ELEVATED PRESSURE AND/OR TEMPERATURE
 - H280- CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED
 - OSHA-H01-MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION
 - CGA-HG04-MAY FORM EXPLOSIVE MIXTURES WITH AIR.
 
Precautionary Statements
- P202 - Do not handle until all safety precautions have been read and understood
 - P210 - Keep away from Heat, Open flames, Sparks, Hot surfaces. No smoking
 - P271 + P403 - Use and store only outdoors or in a well-ventilated place
 - P377 - Leaking gas fire; Do not extinguish, unless leak can be stopped safely
 - P381 - Eliminate all ignition sources if safe to do so.
 - P501 - Dispose of contents/Container in accordinance with container Supplier/owner instructions
 - CGA-PG05 - Use a back flow preventive device in the piping
 - CGA-PG13 - Fusible plugs in the top, bottom, or valve melt at 98 degrees C to 107 degrees C (208 degrees F to 224 degrees F).
 - Do not discharge at pressures above 15 psig (103 kPa)
 - CGA-PG06 - Close valve after each use and when empty
 
Town of Oro Valley Local data
- SKU #
 
*This local data is shared by all revisions